Picture Framing for Photographers - Part 2

There are two sources for obtaining the moulding for making a frame. You can firstly start with a straight piece of timber, and using a home routing system make your own moulding shape with a rebate to take the art work. Alternatively you can pick from a large range of ready finished mouldings available from your local frame shop or hardware store. I recommend the latter. It's easier, the choice is much wider, and it's more cost effective. However, one word of warning. Always look for a moulding with a good straight back and not too flat on the surface. If the moulding has a bump or some raised section in the top surface it will cut and join easier than a flat moulding. Most mouldings are made from pine or obeche. These are soft grain timbers and cut and join well. Hard timbers like ramin are more difficult to work with.

Measuring and Cutting

How much moulding will you need? The outside dimensions of the frame are determined by the size of the mounted photograph. Carefully measure the overall size of the matted picture you're framing, adding a little extra (3-smm) for "play" to ensure the picture fits easily into the finished frame.

Add the length and the breadth together, then double the total. This will give you the overall length. But you also have to allow for the mitre cuts, so multiply the width of the moulding by 10 and add this to your total (total length required = 2 x (length + breadth) + 10 x width of moulding). The 45 mitre cuts are most important - a bad cut will never join properly and will always look terrible. There are a number of machines on the market for cutting 45 degree mitres starting with the simple mitre box, radial arm saw with a mitre attachment, or a commercial mitre saw (see picture 1).

Cutting one side of a frame is easy. Cutting the second side to be EXACTLY the same side to the first side is the hard part of frame cutting. Using a measuring system you can cut lengths accurately every time. The FrameCo measuring system will attach to any brand of electric or manual mitre saw and will make the cutting of the frames quick and foolproof.

If you have a saw you can cut without using a measuring system. Follow this easy step-by-step guide to cut mitred lengths for your frame:

* Calculate the dimensions of your frame.

* Place the moulding into the saw.

? Cut off a small piece at 45 degrees with the saw in the lefthand position.

* Remove the moulding from the saw.

? With a tape, measure along the back of the moulding, to the length you require.

To this length you have to take into account the size of the moulding you are using. So you add to the length of the side an amount equal to twice the moulding width - not including the rebate. Then make a pencil mark on the back of the moulding near the top so that you can see the mark.

? Put the moulding back in the saw and align the saw blade on the pencil mark.

? Swing the saw around and cut the next mitre.

? Place the two pieces back to back so you can transfer the size you have just cut to the back of the moulding length.

? Repeat the cutting procedure for the other pieces.

Joining the Frame

To ensure a tight and stable joint, glue should be applied, especially if the frame is large. A light smear of a good quality PVA glue is all that's necessary. Although it is possible to buy clamps that join two corners at a time, it's simpler and quicker to clamp all four corners at once. This allows you to see how the corners match up before gluing and securing the mitres. There are several types of clamps...

Cord Clamps: This simple, but effective clamping system works well for small to medium-size frames. It consists of four flexible plastic corners and a length of cord. (See picture 2).

Metal Strap Clamp: This clamping system is slightly more sophisticated and consists of a metal strap, flexible corner pieces and a screw operated tensioning device which allows you to apply a considerable amount of tension so that the corners are pulled together tightly. The Strap Clamp is suitable for large and small frames. (See picture 3).

Once the frame is clamped together and you've made sure all the corners are aligned, then the mitre joint should be secured or reinforced. Glue alone is not safe and secure enough for most sized frames. Here are some options.

Panel Pins: You can nail a panel pin across the mitre. It is advisable to pre-drill the holes and secure the joint in a vice before hammering the pins into the frame. Punch home the nail head and fill the hole with a coloured woodfiller.

V-Nails: Professional framers use these v-shaped staples, which are inserted using a special manual or pneumatic joining machine. The "PushMaster" is a DIY version of these machines and is suitable for low-volume high-quality framing such as required for photography or portrait framing.

Biscuit Joints: More suitable for large and heavy frames such as mirrors. Most commercial picture frame mouldings are small and a biscuit joint is not necessary.

V-Nail Joining Machines There are several models of these machines and all are suitable for the DIY or low-volume picture framing. Here are some of the models.

PushMaster: Similar to a large punch, the PushMaster is a handheld, easy to use tool for inserting the v-nails into the back of timber picture frames. The vnail is loaded onto the magnetic end of the PushMaster, sharp end down, then simply pushed into the wood. The v-nail pulls the joint together because it is made from spring steel. The advantage of the PushMaster is that it doubles as a fitting up tool. The magnetic tip can also be used to fit flexipoints and backing nails to secure the picture into the frame. (See picture 4).

BenchMaster: The BenchMaster is ideal for the serious DIY framing photographer. The powerful cam action of the handle combined with the heavy duty Push Master drives v-nails into the hardest of timbers. Its gentle hand action suits joining small or odd-shaped mouldings. If you start with FrameCo's Push Master you can upgrade to the BenchMaster at any time. (See picture 5).

V-Nails - How Do They Work?

Upon entering the wood moulding from the base, the sides of the metal v-nail are deflected outwards. As the v-nail pulls back into its original shape this pulls the joint tightly together. There is a little curl on the outer leading edge of the nail that locks the nail into the grain of the timber. This stops the nail from pulling out of the end of the mitre, keeping the joint stable and secure. The v-nail method of joining is the preferred method of professional picture framers. With a few simple hand tools it's possible to achieve the same result with a minimal outlay in machinery.

Making Multi-sided Frames

With most good quality suspension type mitre saws there's always the possibility of cutting mitre angles other than 45 degrees. The problem is that the saws do not have a system of measuring the length of the cut. The FrameCo measuring system has a clever scale included with the unit. It allows you to measure a length for any angle. A six-sided frame has the six mitres cut at 30 degrees, while an eight-sided frame has the eight mitres cut at 22.5 degrees. The Measure Mate Scale converts the measuring system into a multi-angled scale so that each one of these different angled mitres can be measured.

So it's possible for the amateur framer to make attractive multiangled frames that add style and creativity to your framing.

Finishing and Assembly

Now that the frame is joined and the glue joints dry you're ready to assemble your mounted photograph into the frame. The PushMaster can be used to fit backing nails or flexipoints into the frame to hold the picture into the rebate.

Seal the back of the picture with gummed tape or good quality backing tape. The best backing tape to use is a silicone coated tape as this will not peel off over time.

Screw two small O-rings or screw eyes into the side of the frame, approximately one third of the distance down the top of the frame, then attach a length of wire or cord securely through the O-rings or screw eyes. After that, your image is ready to hang on a wall.

Gary Leete, of Frameco Picture Framing Supplies, is a professional framer. For further information on any of the his DIY picture framing tools contact FrameCo P/L Australia, Ph: (03) 98723600 or visit the web site at http://www.clubframeco.com

---

Google News Updated : Sun, 12 Oct 2008 17:51:10 GMT "Chihuahua" bites Crowe, DiCaprio at box office - Reuters "Chihuahua" bites Crowe, DiCaprio at box office Reuters - 1 hour ago LOS ANGELES (Reuters) - The new terrorism thriller "Body of Lies" failed to take the top spot at the weekend box office in North America on Sunday, becoming the latest victim of moviegoer aversion to movies dealing with Middle East intrigue. 'Chihuahua' still has bite in second weekend at box office USA Today ‘Body’ Talk, Baby Talk Business Mirror Fort Wayne Journal Gazette all 21 news articles Publ.Date : Sun, 12 Oct 2008 16:19:10 GMT Lisa Marie Presley delivers twins: report - Reuters Reuters Lisa Marie Presley delivers twins: report Reuters - Oct 11, 2008 LOS ANGELES (Reuters) - Lisa Marie Presley, Elvis Presley's only child, gave birth to twin baby girls on October 7, celebrity news TV show "Entertainment Tonight" said on its website on Saturday. Twin girls for Lisa Marie Presley BBC News Lisa Marie Presley Welcomes Twin Girls E! Online eFluxMedia - People Magazine - Associated Content - USA Today all 652 news articles Publ.Date : Sat, 11 Oct 2008 17:17:01 GMT Texas new No. 1 in coaches poll after wild college football weekend - USA Today News 8 Austin Texas new No. 1 in coaches poll after wild college football weekend USA Today - 32 minutes ago By Eddie Timanus, USA TODAY The date won't quite live in infamy, but college football followers should remember Oct. 11, 2008, for a long time. Kansas fails to move up in polls KUsports Texas grabs top ranking in AP Poll Louisville Courier-Journal The Huntsville Times - al.com - Austin American-Statesman - The Birmingham News - al.com - Nittany Lines all 13 news articles Publ.Date : Sun, 12 Oct 2008 17:18:35 GMT US-POLITICS Summary - Washington Post USA Today US-POLITICS Summary Washington Post - 2 hours ago WASHINGTON (Reuters) - Democrat Barack Obama has opened a 6-point lead over Republican rival John McCain in the US presidential race, according to a Reuters/C-SPAN/Zogby poll released on Sunday. John McCain and Sarah Palin try new tactics Los Angeles Times Pittsburgh Paper Picks Obama, Pans on McCain/Palin Ticket FOXNews Dallas Morning News - Seattle Times - KXMC - San Francisco Chronicle all 1,680 news articles Publ.Date : Sun, 12 Oct 2008 15:22:18 GMT Obama Gains in States Such as Iowa, Florida Give National Boost - Bloomberg BBC News Obama Gains in States Such as Iowa, Florida Give National Boost Bloomberg - 1 hour ago By James Rowley and Kristin Jensen Oct. 12 (Bloomberg) -- Democratic presidential candidate Barack Obama is moving ahead in a series of new polls from Florida to Iowa, gains that are helping him maintain a national lead over Republican John McCain. Video: Kids Vote On Campaign '08 CBS Newsday poll: Obama has double-digit lead on Long Island Newsday Orlando Sentinel - New York Times - Reuters - Detroit Free Press all 2,708 news articles Publ.Date : Sun, 12 Oct 2008 15:51:54 GMT Stem cell promises, obstacles remain four years after bill's approval - San Jose Mercury News Stem cell promises, obstacles remain four years after bill's approval San Jose Mercury News - 1 hour ago EDITOR'S NOTE: This is first of a two-part series examining the progress and potential pitfalls in California's $3 billion stem cell research program. Researchers find easier way to make stem cells Reuters India New method generates stem cells safely from mice Reuters Chicago Tribune - Bloomberg - Houston Chronicle - The Daily Yomiuri all 68 news articles Publ.Date : Sun, 12 Oct 2008 16:34:39 GMT Spotlight on Apple notebooks: 1989 to 2008 - CNNMoney.com Washington Post Spotlight on Apple notebooks: 1989 to 2008 CNNMoney.com - 2 hours ago On Tuesday, Oct. 14, Apple will unveil the latest addition to a long line of portable computers that dates back nearly 20 years - to the ungainly, 15.8-pound “Macintosh Portable” that PC World named the 17th worst technology product of all time. This week in Apple: New notebooks, new writers, and more Woz Ars Technica Don't Buy A Mac Laptop* Washington Post New York Times - eFluxMedia - CRN - Wall Street Journal all 185 news articles Publ.Date : Sun, 12 Oct 2008 15:23:15 GMT Turn Affiliate Datafeed into RSS Amazon Tool

PARLOT::Ebooks, Scripts, Websites, and more...

Adsense websites

The Venice Rookery

Love is in the air at the Venice Rookery. The... Read More

Start Your Own Photography Business from Home

Anyone with the right camera equipment, and the necessary skills... Read More

Photography Business: Taking Baby Photos - for Professionals & Families

Babies make the best and the worst subjects to photograph.... Read More

Help! My Old Colour Photo has Turned Pink ? 5 Minute Digital Fix

Almost all of us will have seen this particular photographic... Read More

The Best Wildlife Camera To Take On Safari

Good wildlife camera equipment on safari can make the difference... Read More

Becoming A Digital Artist On A Budget

So, you want to become a digital artist but paying... Read More

Tips for Better Vacation Photos

Photos are a great way to share your travel experiences... Read More

Travel and Scenic Photography 101

When you're driving through the mountains somewhere, and you... Read More

Who Had The Better Brushes Leonardo or Michelangelo?

Ordinary photos of dull subjects do actually sell, but the... Read More

Digital Camera Batteries

Every device needs a driving force to operate, just as... Read More

Wildlife Scouting Cameras

For years I wondered how big the bucks were that... Read More

The Benefits of Underwater Digital Cameras

Underwater digital cameras are fun and easy to use under... Read More

Megapixel Cameras: How Many Megapixels Do You Need?

Knowing which megapixel camera to buy can be intimidating. There... Read More

Wedding Photography: How to Become a Successful Wedding Photographer

Once in while I receive e-mails or phone calls from... Read More

Crooked Horizons in Your Photos? ? Here is a Five Minute Digital Fix

Remember the good old photography days?Film camera in hand, you... Read More

Using Film Speed Effectively (Black & White Film Thoughts)

It's hard to find sometimes but it's making a resurgence,... Read More

Top of the Line Digital Cameras

If you think that digital cameras are for snapshots only,... Read More

Should You Print Your Digital Photos at Home or Use a Photo Printing Service?

There are lots of options available for getting your digital... Read More

Canon-Powershot-A80 Review

Last month we bought the Canon Powershot A80 online for... Read More

HP Digital Cameras - History and Beyond

HP has started making digital cameras only recently. However, the... Read More

Seven Ways for Saving Your Digital Images Forever!

So, you have taken lots of pictures with your new... Read More

Pinhole Photography: Right Back to Basics

Why Pinhole Photography?It's fun. It's creative. It's educative about the... Read More

Digital Photography: The RAW vs JPG Debate

If you use a digital camera (I use a Canon... Read More

What Should You Look for in a New Camera?

These parameters are discussed at 2 levels: -Based on... Read More

A Guide to Underwater Cameras

There are two types of underwater camera systems: an ""amphibious""... Read More